TEXTURA dev

Tap "Start sound" (browsers need a tap before they play audio).
1 · PICK A LANE

Tap a black key. Each group is one lane: 3 keys for lane 1, 2 for lane 2, 3 for lane 3, 2 for lane 4. Hold one for 0.6 s to mute that lane, again to unmute it.

2 · HOW MANY

The seven left white keys set how many sources play: off, 1, 2, 4, 10, 19 or 32.

3 · HOW ACTIVE

The nine right white keys set how often they sound, from rare to busy. Four lanes play at once.

PLAY MODE

SEL turns the keys into a pitched keyboard for the selected lane; OCT− and OCT+ then shift the octave.

Computer keys: A–; the keys F3–A4 · Z X lane / octave · Space all on / off · ← → pages · ↑ ↓ landscapes · knobs: drag or wheel · MIDI notes: channel 1 the selected lane, channels 1–4 lanes 1–4 (GLO: MIDI IN); CC and NRPN: lanes 1–4 on their channels, the effects on 5

INSTALL ON YOUR FM-1

Firmware
...
sha256
-

Installing Textura replaces the firmware now on your FM-1; you can go back at any time the same way. Connect the FM-1 with a USB data cable: the page finds it. The browser asks to allow MIDI with SysEx: allow it. An install that was cut off (UPDATE MODE on the screen) resumes from here. Once installed, the FM-1 shows up on USB as Textura FM-1 (USB id 1209:000A for now).

If something goes wrong, switch the FM-1 off, hold OCT− and switch it on: the USB rescue, and install again.

Textura dev · Physically modelled textures, computed, never sampled: the same firmware code, compiled to WebAssembly · GPL-3.0 · based on Frodhes, built on Dinghy and Felucca · DotGothic16 and Inter Tight fonts, SIL OFL 1.1
An independent open-source project, not affiliated with or endorsed by any instrument maker. No warranty.